Study on dry-sliding wear (DSW) of uncoated IN800 super alloy and sol-gel based dip coated IN800 substrate

Kumar, Dipak ; Pandey, Kailash Narayan

Abstract

In the present paper, sliding wear characteristics of seven weight% yttria stabilized zirconia (7YSZ) sol-gel depositedon to air plasma sprayed CoNiCrAlY bond-coated Inconel 800 superalloy has been studied. For this, sliding wear tests haveperformed on pin-on-disc friction and wear test rig by varying experimental parameters applied load, sliding velocity, discspeed and temperature as per L16 orthogonal arrays of Taguchi. Taguchi method has been used to perform experiments toknow the effect of interaction of variables on dry sliding wear behavior. The optimal experimental parameters have beenobtained by orthogonal arrays, signal-to-noise ratio (SNR) and analysis of variance (ANOVA) for uncoated and coatedInconel 800 superalloy substrate. Results have shown temperature as the most influencing parameter for uncoated samplesand coated samples, both. However, compared with coated samples, applied load has been found significant factor foruncoated samples. It has been exhibited better wear resistance in the sol-gel derived YSZ coated surface of IN800superallloy substrate.

Keyword(s)

Dry-sliding wear, Sol-gel thermal barrier coating, IN800 superalloy, Taguchi method

Full Text: PDF (downloaded 14 times)

Refbacks

  • There are currently no refbacks.
This abstract viewed 9 times