| Issue | Title | |
| Vol 28, No 3 (2021): IJEMS-June 2021 | Critical success factors of lean manufacturing for Indian ceramic industries: Modelling through interpretive ranking process |
Abstract PDF |
| Bhadu, Jagdish , Bhamu, Jaiprakash , Singh, Dharmendra | ||
| Vol 28, No 3 (2021): IJEMS-June 2021 | Implementation of machine learning model-based to predict T2DM risk using heart rate variability features |
Abstract PDF |
| Rathod, Shashikant Rajaram, Chaskar, Uttam , Phadke, Leena , Patil, Chetankumar | ||
| Vol 28, No 3 (2021): IJEMS-June 2021 | Effect of process parameters on tensile strength and surface quality of PLA-ABS part produced by fused deposition modeling |
Abstract PDF |
| R, MOHANRAJ , Moorthy, Elangovan Sooriya, Balasubramanian, Arunkarthik , Kumaran, Pratheesh Kumar Selva, Baig, Maaz Baig Nayaz, Alagappan, Shriram , Moorthy, Muneeskumar | ||
| Vol 28, No 3 (2021): IJEMS-June 2021 | Energy harvesting from low-frequency sinusoidal vibrations using diaphragm type piezoelectric element |
Abstract PDF |
| Yadav, Nitin , Kumar, Rajesh | ||
| Vol 28, No 3 (2021): IJEMS-June 2021 | Establish time-temperature-transformation diagram based on dilatometry results and microstructural evolutions in an AISI 1010 steel |
Abstract PDF |
| Mehta, Yashwant , Rajput, Sunil Kumar, Kumar, Sanjeev | ||
| Vol 28, No 3 (2021): IJEMS-June 2021 | Fabrication and torsional strength evaluation of a glass fiber epoxy composite shaft |
Abstract PDF |
| Jagadale, Vishal Satish, Padhi, Surya Narayan | ||
| Vol 28, No 3 (2021): IJEMS-June 2021 | Influence processing parameters of FDM 3D printer on the mechanical properties of ABS parts |
Abstract PDF |
| Shafaat, Amir , Rezaei Ashtiani, Hamidreza | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | A band-selective CMOS low-noise amplifier with current reuse gm boosting technique for 3-5 GHz UWB receivers | Abstract PDF |
| Shim, Jaemin , ., Jinwoopark , Jeong, Jichai | ||
| Vol 27, No 1 (2020): IJEMS- February 2020 | A comparative investigation of inter-row delay timing vis-à-vis some rock properties on high sandstone benches | Abstract PDF |
| Rai, Piyush | ||
| Vol 27, No 5 (2020): IJEMS- OCTOBER 2020 | A modified energy detection based dynamic spectrum sharing technique and its real time implementation on wireless platform for cognitive radio networks | Abstract PDF |
| Bhandari, Shruti , Joshi, Sunil | ||
| Vol 27, No 6 (2020): IJEMS- DECEMBER 2020 | A new insight on the understanding of carbonisation and graphitisation mechanisms | Abstract PDF |
| Puech, Pascal , Monthioux, Marc | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | A probabilistic model of acoustic emissions generated during compression test of cementitious materials for crack mode classification | Abstract PDF |
| Sagar, R Vidya | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | A Unique Pipe-Like C3N4 with Enhanced Photocatalytic Degradation of Organic Pollutant | Abstract PDF |
| Akple, Maxwell Selase | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Additive manufacturing of composite materials by FDM technology: A review | Abstract PDF |
| Mazurchevici, Andrei Danut, Nedelcu, Dumitru , Popa, Ramona | ||
| Vol 27, No 5 (2020): IJEMS- OCTOBER 2020 | Alternative system to measure hydrogen content in molten aluminium using an electrochemical sensor | Abstract PDF |
| Juárez Hernández, Arturo , Trapaga-Martinez, Gerardo , Camacho-Martinez, Jose Luis, González-Rivera, Carlos , Lopez Juarez, Ismael | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | An adaptive denoising approach to powerline interference reduction in ECG recording | Abstract PDF |
| Kumar, Manoharan Suresh, Krishnamoorthy, Ganapathy , Vaithiyanathan, Dhandapani | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | An experimental and simulation validation of residual stress measurement for manufacturing of friction stir processing tool | Abstract PDF |
| Butola, Ravi , Murtaza, Qasim , Singari, Ranganath Muttana | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | An optimized MAC based architecture for adaptive digital filter | Abstract PDF |
| James, Britto Pari, Dhandapani, Vaithiyanathan , Mariammal, Karuthapandian | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | Analysis of key performance indicators for sustainable manufacturing in sugar industry using analytical hierarchy process | Abstract PDF |
| Patil, Hanamantagouda Rangangouda, Javalagi, Channappa Muttappa | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Anchoring the CFRP strengthening of concrete bridge decks: A comparison of methods | Abstract PDF |
| Shuai, Tian , Zhenkun, Miao , Bo, Sun | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Application of 2XXX and 7XXX series alloys as input material for the new casting-forging hybrid process | Abstract PDF |
| Szuckia, Michal , Dziubinska, Anna , Winiarski, Grzegorz , Majerski, Krzysztof , Drozdowski, Krzysztof , Gorny, Marcin , Buras, Janusz | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Application of hybrid AHP-TOPSIS technique in analyzing the braking performance sensitivity of organic-ceramic fibrous reinforced friction composites | Abstract PDF |
| Kumar, Mukesh | ||
| Vol 28, No 2 (2021): IJEMS- April-2021 | Assessment of heat generation and its effect during cortical bone drilling using infrared camera and histology | Abstract PDF |
| Singh, Gurmeet , Jain, Vivek , Gupta, Dheeraj , Schlatterer, Daniel R | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Average austenite grain size evolution simulation during multi-pass shape metal hot rolling process | Abstract PDF |
| Qingqiang, He , Han, Zhu , Jianguo, Liu , Wanli, Chai , Chunli, Geng , Junyou, Zhao | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | Bandgap current reference using widlar current source | Abstract PDF |
| Aggarwal, Bhawna , Arora, Yogita , Dhona, Jasdeep Kaur | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Barkhausen noise analysis of friction stir processed steel plate | Abstract PDF |
| Yusufzai, Mohd Zaheer Khan, Raja, Avinash Ravi, Gupta, Sanjay Kumar, Vashista, Meghanshu | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | Buckling load for telescopic cylinder using successive approximation method | Abstract PDF |
| Gupta, Sumit Kumar, Prakash, Jatin , Kankar, Pavan Kumar | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Characteristic Investigations of Cutting-Force measuring Dynamometers | Abstract PDF |
| Kumar, Harish , Khan, Shahroz Akhtar, Azam, Mohammad Sikandar, CHATTOPAHYAYA, Somnath | ||
| Vol 27, No 1 (2020): IJEMS- February 2020 | Comparative study of mechanical technologies over laser technology for drilling carbon fiber reinforced polymer materials | Abstract PDF |
| Balasubramaniam, Vellaisamy , Rajkumar, Durairaj , Ranjithkumar, Poovaraj , Narayanan, Chinnaiyan Sathiya | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Composite building materials from natural fibers/ agro-forest residues | Abstract PDF |
| Singh, Richa , Singh, Brajeshwar , Gupta, Manorama , Tarannum, Hina | ||
| Vol 28, No 2 (2021): IJEMS- April-2021 | Computational analysis of core cavity Mach-Zehnder interferometer based optical sensor for various types of virus | Abstract PDF |
| SSundaresan, Vishalatchi Saravana, Ramrao, Nagaraj , Sharan, Preeta , Murugan, Kalpana | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | Computational investigation of solar updraft tower for power generation in sultanate of Oman | Abstract PDF |
| Husain, Afzal , Zunaid, Mohammad , Brashdi, Mohammed AL, Maqbali, Fahad Al, Al-Jabri, Emad , Al-Mahrizi, Abdulmonem | ||
| Vol 28, No 1 (2021): IJEMS- February 2021 | Corrosion and wear behaviour of HVOF spraying WC-12% Ni coating on gray cast-iron | Abstract PDF |
| Güney, Bekir | ||
| Vol 27, No 1 (2020): IJEMS- February 2020 | Corrosion behavior of boride diffusion layer on CoCrMo alloy surface | Abstract PDF |
| Arguelles-Ojeda, José Luis, Palmerin, Joel Moreno, Robles, Alberto Saldaña, Corona-Rivera, Miguel Angel, Torres, Martin Zapata, Herrera, Alfredo Márquez | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Corrosion behaviour of dissimilar TIG welded austenitic stainless steel AISI 304 and martensitic stainless steel AISI 420 | Abstract PDF |
| Ghosh, Abhishek , Pal, Pradip Kumar | ||
| Vol 28, No 2 (2021): IJEMS- April-2021 | Cu-Cu thermo compression wafer bonding techniques for micro-system integration | Abstract PDF |
| Agrawal, Megha , Manohar, Bottumanchi Morish, Nagarajaiah, Kusuma | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Deposition of TiC-Cu composite coating on AISI 304 stainless steel by EDC process using powder compact tool electrode | Abstract PDF |
| D, Tijo , Kumari, Shilpi , Masanta, Manoj | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Design and Analysis of Decagonal Photonic Crystal Fiber with Elliptical air hole core for liquid sensing | Abstract PDF |
| Sharma, Ritu , Panwar, Kuntal , Sharma, Varshali , Chaudhary, Santosh | ||
| Vol 27, No 5 (2020): IJEMS- OCTOBER 2020 | Design and analysis of SOI and SELBOX junctionless FinFET at sub-15 nm technology node | Abstract PDF |
| Singh, Satya Prakash, Akram, Md Waseem | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | Design and development of an additive manufactured force transducer | Abstract PDF |
| Choudhary, Harshvardhan , Vaithiyanathan, Dhandapani , Singh, Ajay Pratap, Sheoran, Ankita Jaisingh, Kumar, Harish | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | Design and investigation of Hybrid 2D codes for optical CDMA systems | Abstract PDF |
| Bharti, Manisha | ||
| Vol 28, No 1 (2021): IJEMS- February 2021 | Development and certification of chromic acid-free anodizing process for aircraft grade aluminium alloys | Abstract PDF |
| Jayam, Balaraju N, Varathan, Ezhilselvi , Srivastava, Meenu , Thayee, Manikandanath N, Murugasen, Ganesh , Ramasamy, Shanmugavel , Kale, Shirish Sharad, Kasturi, Nagacharan V, Chikkamadal, Manjunatha M | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | Development of a NIOSH based software tool for musculoskeletal disorders | Abstract PDF |
| Mohan, Sanjay , Anand, Ankush , Haq, Mir Irfan Ul, Raina, Ankush , Kumar, Rajiv , Kamal, Mohd | ||
| Vol 27, No 6 (2020): IJEMS- DECEMBER 2020 | Development of conductive CFRPs using PANI-P-2M thermoset polymer matrix | Abstract PDF |
| Pati, Santwana , Das, Sukanta , Goto, Teruya , Takahashi, Tatsuhiro , Yokozeki, Tomohiro | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | Diagnosis of bearing faults using multi fusion signal processing techniques and mutual information | Abstract PDF |
| Dave, V , Singh, S , Vakharia, V | ||
| Vol 27, No 6 (2020): IJEMS- DECEMBER 2020 | Dielectric properties of micro-composites based on acrylic coated conducting carbon particles and silicone elastomer | Abstract PDF |
| Singh, Ajit Shankar, Das, Vishal , Mishra, Preeti , Pandey, Arvind Kumar | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | Digitally controlled sigma-delta modulated direct matrix converter for high frequency AC-AC Conversion | Abstract PDF |
| Khan, Irfan Ahmad, Agarwal, Anshul | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | DRIFT ANALYSIS OF A Pd LOADED SnO2 BASED LINALOOL SENSOR | Abstract PDF |
| Kakoty, Priyanka , Bhuyan, Manabendra , Das, Karen | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Ductile fracture and microstructure of a bearing steel in hot tension | Abstract PDF |
| Huo, Yuanming , He, Tao , Xue, Yong , Shen, Menglan , Yang, Wanbo , Hu, Yujia | ||
| Vol 27, No 1 (2020): IJEMS- February 2020 | Effect of alumina impurity on microstructure and properties of alumina based conventionally brazed joints | Abstract PDF |
| Dandapat, Nandadulal , Ghosh, Sumana , Ghosh, Sumana | ||
| Vol 27, No 6 (2020): IJEMS- DECEMBER 2020 | Effect of carbon nanotubes on the interlaminar and fracture properties of carbon fiber/epoxy composites | Abstract PDF |
| Bedi, Harpreet Singh, Agnihotri, Prabhat Kumar | ||
| Vol 27, No 6 (2020): IJEMS- DECEMBER 2020 | Effect of fibre orientation on mechanical properties of carbon fibre composites | Abstract PDF |
| Subhedar, Kiran Mahadeo, Chauhan, Gaurav Singh, Singh, Bhanu Pratap, Dhakate, Sanjay Rangnath | ||
| Vol 28, No 1 (2021): IJEMS- February 2021 | Effect of foil thickness and cell size of honeycomb on energy absorption of aluminium honeycomb sandwich composite (Charpy Test) | Abstract PDF |
| Rajput, Arun , Sunny, Mohammed Rabius, Sarkar, Arunjyoti | ||
| Vol 27, No 6 (2020): IJEMS- DECEMBER 2020 | Effect of heat treatment on desulphurization of petroleum coke | Abstract PDF |
| Mahur, Jagpal Singh, Chakraborty, Ranadeep | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Effect of laser remelting on the microstructure and mechanical properties of meta inert gas welded low carbon mild steel | Abstract PDF |
| Sathish, Sathyavageeswaran | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Effect of material and machining features in electric discharge machining of 6061Al/rock dust composites | Abstract PDF |
| Prakash, Kumarasamy Soorya, Gopal, Pudhupalayam Muthukutti, Rahul, Raghavan Nair | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Effect of mechanical properties on banana macro particle reinforced epoxy composites | Abstract PDF |
| Jayaseelan, Chinnapalanichamy , Padmanabhan, Palani , Athijayamani, Ayyanar , Ramanathan, Kalimuthu | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Effect of Nano-Silica on the Physical, Mechanical and Thermal Properties of the Natural Rubber Latex Modified Concrete | Abstract PDF |
| Varghese, Marina Leyan, Babu, Richu John, R, Suraj Menon, Rajan, Reny , Gopal, Vinayak Venu, Jacob, Ancheli Siby, Titus, Vinny Ann, Mathew, Mini , George, Soney Chathukulam | ||
| Vol 27, No 1 (2020): IJEMS- February 2020 | Effect of process parameters and VC content on structural and mechanical properties of WC-20Co nano composites | Abstract PDF |
| Kumar, Devender , Singh, Kulvir | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Effect of rare earth on microstructure and wear behaviour of Ni based microwave clad | Abstract PDF |
| Singh, Kanwarjeet , Sharma, Satpal | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Effect of red mud proportion on the strength and microstructure of ferrosialate based geopolymer mortar | Abstract PDF |
| Yeddula, Bharath Simha Reddy, Somasundaram, Karthiyaini | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Effect of surface mechanical attrition on microstructure and mechanical properties of hypoeuctectoid steel | Abstract PDF |
| Tadge, Prashant , Sasikumar, Chandrabalan | ||
| Vol 27, No 1 (2020): IJEMS- February 2020 | Effect of the base material condition on the structure and properties of Al2O3 oxide layers | Abstract PDF |
| Skoneczny, Wladyslaw | ||
| Vol 27, No 5 (2020): IJEMS- OCTOBER 2020 | Effect on wear property during LN2 sliding | Abstract PDF |
| Sharma, Anurag , Singh, Ramesh Chandra, Singari, Ranganath Muttanna | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Effects of adding aluminium in zinc bath on Co-Zn interfacial reaction | Abstract PDF |
| Liu, Yongxiong , Yin, Fucheng , Li, Zhi , Chen, Zhu , Zhao, Manxiu , Long, Zhaohui | ||
| Vol 27, No 1 (2020): IJEMS- February 2020 | Electrochemical characterization of samples of commercial steel treated with acetylene plasma | Abstract PDF |
| Regone, Natal Nerímio, Souza, Maria Eliziane Pires de, Freire, Célia Marina Alvarenga, Ballester, Margarita , Rangel, Elidiane Cipriano, Cruz, Nilson Cristino da | ||
| Vol 27, No 5 (2020): IJEMS- OCTOBER 2020 | Engineering properties of geopolymer prepared by mild chemical activation of ground granulated blast furnace slag | Abstract PDF |
| Singh, Ashita , Bhadauria, Sudhir Singh, Mudgal, Manish , Kushwah, Suresh Singh | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Enhancement of interfacial adhesion in UHMWPE fiber/HDPE composites by electrophoretic deposition of graphene oxide on UHMWPE fibers | Abstract PDF |
| Zhuoda, Jiang | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Environment effect on microstructure properties of gas tungsten arc welding for titanium and aluminium alloy joints | Abstract PDF |
| Kaliappan, Nandagopal , Chidambarakuttalam, Kailasanathan | ||
| Vol 28, No 1 (2021): IJEMS- February 2021 | Examining the effect of nano-additions of rare earth elements on the hardness of body armor ceramic | Abstract PDF |
| Shbool, Mohammad , Al-Abdallat, Yousef , Abdul Jawwad, Abdul Kareem , Alsharairi, Saja , Abu Ghannam, Leen , Abu-Khajil, Ezz-Eddin , Badwan, Ahmad | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Excellence of Al-metal matrix composite fabricated by gas injection bottom pouring vacuum stir casting process | Abstract PDF |
| Kataria, Mukul , Mangal, Sanjay Kumar | ||
| Vol 28, No 2 (2021): IJEMS- April-2021 | Experiences from the implementation of last planner system® in construction projects |
Abstract PDF |
| Venkatesh, Prasad Kudrekodlu, VVenkatesan, Vasugi | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Experimental determination of residual flexural strength and critical buckling load of impact-damaged glass/epoxy laminates | Abstract PDF |
| Aslan, Züleyha , Kiratli, Sakine | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Experimental investigation of corrosion effect on bending fatigue of the wire ropes | Abstract PDF |
| Salman, Ozlem , Imrak, Cevat Erdem | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Experimental study on developed electrochemical micro machining of hybrid MMC | Abstract PDF |
| Kalraa, Charanjit Singh, Kumar, Vinod , Manna, Alakesh | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Experimental study on the influence of copper oxide nano-fluid on surface integrity in turning of AISI O1 steel | Abstract PDF |
| Shabgard, Mohammad Reza, Gholipoor, Ahad , Javid, Sajad Lotf | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Exploring grindability of Ti-6Al-4V using an indigenously developed environment friendly micro pump based cooling system | Abstract PDF |
| Mahata, Sirsendu , Mukhopadhyay, Manish , Banerjee, Ayan , Kundu, Arnab , Mandal, Bijoy , Das, Santanu | ||
| Vol 27, No 6 (2020): IJEMS- DECEMBER 2020 | Fabrication of biowaste derived carbon-carbon based electrodes for high-performance supercapacitor applications | Abstract PDF |
| Mitravinda, Tadepalli , Karthik, Mani , Anandan, Srinivasan , Sharma, Chandra Shekar, Rao, Tata Narasinga | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Fabrication of prototype connecting rod of PLA plastic material using FDM prototype technology | Abstract PDF |
| Maurya, Nagendra Kumar, Rastogi, Vikas , Singh, Pushpendra | ||
| Vol 27, No 6 (2020): IJEMS- DECEMBER 2020 | Fe-Ni nanoparticle-catalyzed controlled synthesis of multi-walled carbon nanotubes on CaCO3 | Abstract PDF |
| Shivanna, Srikantaswamy , Krishnegowda, Jagadish , Ramesh, Abhilash Mavinakere, Gangadhar, Akshatha | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Finite element modeling of girth welded pipe with multiple defects | Abstract PDF |
| Shang, Hsu Yang, Silva, Ivan Ferreira da | ||
| Vol 28, No 1 (2021): IJEMS- February 2021 | Friction stir processing of aluminum alloys | Abstract PDF |
| Singh, Pratap , Kandikonda, Hans Raj | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Friction stir welding of copper: Processing and multi-objective optimization | Abstract PDF |
| Singh, Gurmeet , Thakur, Ankit , Singh, Satpal , Sharma, Neeraj | ||
| Vol 27, No 1 (2020): IJEMS- February 2020 | GGBFS & M-sand impact on workability and strength properties of fly-ash based geopolymer concrete | Abstract PDF |
| Subramanian, Nagajothi , Solaiyan, Elavenil | ||
| Vol 27, No 6 (2020): IJEMS- DECEMBER 2020 | Graphene layer number characterization using scanning kelvin probe force microscopy | Abstract PDF |
| Toutam, Vijay Kumar | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Growth kinetics of Fe2B layers formed on the AISI 4150 steel by different approaches | Abstract PDF |
| Zuno-Silva, Jorge , Keddam, Mourad , Ortiz-Domínguez, Martin , Elias- Espinosa, Milton , Arenas-Flores, Alberto , Cervantes-Sodi, Felipe , Reyes-Retana, José Angel | ||
| Vol 27, No 1 (2020): IJEMS- February 2020 | Heat transfer and magnetohydrodynamic nanofluids flow behaviors past a nonlinear stretching surface considering viscous dissipation and Joule heating | Abstract PDF |
| Chaudhary, Santosh , Kanika, KM , Chaudhary, Susheela | ||
| Vol 28, No 2 (2021): IJEMS- April-2021 | Influence of B4C on microstructural, mechanical and wear properties of Mg-based composite by two-step stir casting | Abstract PDF |
| Singh, Sakshi , Chauhan, Nathi Ram | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Influence of bearing raceway surface topography on the level of generated vibration as an example of operational heredity | Abstract PDF |
| Zmarzły, Paweł | ||
| Vol 28, No 2 (2021): IJEMS- April-2021 | Influence of cutting conditions in drilling of CFRP/Al stacked composites | Abstract PDF |
| Koyyagura, Lakshmi Kala, Karanam, Prahlada Rao | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Influence of micro-structural parameters on fatigue life of discontinuous reinforced metal matrix composites | Abstract PDF |
| Tevatia, Abhishek , Srivastava, Sunil Kumar | ||
| Vol 28, No 2 (2021): IJEMS- April-2021 | Influence of temperature on thermo physical properties of non-prototype material (CaO-Fe2O3, 21:79 by wt. %) for nuclear reactor | Abstract PDF |
| Pandey, Vijay Kumar, Jatav, Sunil Kumar, Pandel, Upender , Duchaniya, Rajendra Kumar | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | Influence of titanium carbide and activated carbon particles on the wear, mechanical properties and microstructure study of A413 metal matrix composite | Abstract PDF |
| Manohara, Hireguntanur Rajanna, Thipperudrappa, Nagaraja , ., Basava , Thippeshappa, Sridhara | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Interface improvement of carbon fiber/PMMA resin composites by fiber surface coating | Abstract PDF |
| Fengxu, Zhou | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Interfacial improvement of carbon fiber/polyoxymethylene composites by depositing functionalized carbon nanotubes on the fibers | Abstract PDF |
| Zhu, Quping | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | Investigation of surface roughness for EN-31 by REDM with graphite electrode | Abstract PDF |
| ., Deepak , ., Vipin | ||
| Vol 27, No 1 (2020): IJEMS- February 2020 | Investigation of the effective parameters on welding residual stress in GTAW of aluminum cylindrical shell | Abstract PDF |
| Dehkordi, Yousef Ghaderi, Anaraki, Ali Pourkamali, Shahani, Amir Reza | ||
| Vol 28, No 2 (2021): IJEMS- April-2021 | Investigation on electroless copper metallization on FDM built ABS parts | Abstract PDF |
| Mohapatra, Bijay Kumar, Sahu, Anshuman Kumar, Mahapatra, Siba Sankar | ||
| Vol 28, No 1 (2021): IJEMS- February 2021 | Lean manufacturing techniques – Implementation in Indian MSMEs and benefits realized thereof | Abstract PDF |
| Bhattacharya, Indrajit , Ramachandran, Anandhi | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Machinability analysis and characterization of aluminium hybrid metal matrix composite using WEDM | Abstract PDF |
| Subbaian, Venkatesan , Jacob, Kingston Barnabas, Durairaj, Ravindran | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Machining performance enhancement of EN-31 diesteel using MWCNT mixed rotary EDM | Abstract PDF |
| Bajaj, Rajesh , Dixit, Amit Rai, Tiwari, Arun Kumar, Chauhan, Nitin Kumar | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | Mechanical and tribological properties of aluminium incorporated with amorphous Ni60Nb40 particles | Abstract PDF |
| Jayalakshmi, Subramanian , Singh, Ramachandra Arvind, Mohan, Sanjay , Chen, Xizhang , Gupta, Manoj | ||
| Vol 27, No 5 (2020): IJEMS- OCTOBER 2020 | Mechanical and wear properties of Si3N4 reinforced titanium composites | Abstract PDF |
| Mutuk, Tuğba , Gürbüz, Mevlüt | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Mechanical properties and kinetics of boride layers on AISI D2 steel produced by plasma paste boriding | Abstract PDF |
| Keddam, Mourad , Makuch, Natalia , Kulka, Michal , Miklaszewski, Andrzej | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Microspheres based on black sand mineral as a photocatalyst for photocatalytic hydrogen production under UV light | Abstract PDF |
| López Vásquez, Andrés Felipe , Pataquiva-Mateus, Alis Yovana , Delgado Niño, Pilar | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Microstructural characterization and mechanical properties of mini specimen of research reactor fuel cladding | Abstract PDF |
| ., Sungkono , Ajiriyanto, Maman Kartaman, Ismarwanti, Sri | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Microstructure and mechanical properties of directionally solidified alloys of Mg-9Zn-2Y | Abstract PDF |
| Wu, Houpu , Yang, Lianwei , Lin, Xiaoping , Liu, Jie , Chai, Tao , Dong, Yun | ||
| Vol 28, No 1 (2021): IJEMS- February 2021 | Microstructure, mechanical and wear behaviour of Al7075/SiC aluminium matrix composite fabricated by stir casting | Abstract PDF |
| Bhowmik, Abhijit , Dey, Dipankar , Biswas, Ajay | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Microstructure, texture, and mechanical properties of two-pass extruded Mg-5Li-1Al sheet | Abstract PDF |
| Li, Ruihong , Jiang, Bin , Chen, Zhijun , Pan, Fusheng , Zhang, Xiaomei | ||
| Vol 28, No 1 (2021): IJEMS- February 2021 | Modeling of an active suspension system with different suspension parameters for full vehicle | Abstract PDF |
| Kumar, Shailendra , Medhavi, Amit , Kumar, Raghuvir | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Modelling and optimization of injection molding process for PBT/PET parts using modified particle swarm algorithm | Abstract PDF |
| Kumar, Sagar , Singh, Amit Kumar, Pathak, Vimal Kumar | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Multifactor optimization for development of hybrid aluminium matrix composites | Abstract PDF |
| Singh, Swarndeep , Singh, Rupinder , Gill, Simranpreet Singh | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Nanohardness and wear behaviour of AISI 1040 steel coated with Ti-6Al-4V 4B4C by magnetron sputtering | Abstract PDF |
| Russel, Malkiya Rasalin Prince, Natarajan, Selvakumar | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Neural network modeling of forces in drilling of glass/epoxy composites filled with agro-based waste materials | Abstract PDF |
| Dhawan, Vikas , Debnath, Kishore , Singh, Inderdeep , Singh, Sehijpal | ||
| Vol 27, No 5 (2020): IJEMS- OCTOBER 2020 | Numerical investigation on heat sink with fluid pockets for high power LEDs | Abstract PDF |
| ., Sangmesh , Narayana, Gopalakrishna Keshava, Kumarasamy, Sudhakar , Samykano, Mahendran , T P, Gowrishankar , Patil, Nagraj | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | On the axial bearing capability of construction steel tube considering the uniform corrosion effect | Abstract PDF |
| Wang, Huajie , Zhang, Zhiwei , Qian, Hongliang , Song, Gang , Wang, Jiangbo , Fan, Feng | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Optical, Strctural and Thermal properties of Hybrid Metal oxide Nanofiller doped polyvinyl alcohol Films | Abstract PDF |
| M, Gayitri H | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Optimal selection of process parameters to reduce vibration during end milling of Al 356/SiC metal matrix composite | Abstract PDF |
| Rajeswari, Sellamani , Sivasakthivel, Perumal Subramaniyan | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Optimization and investigation of process parameters in single point incremental forming | Abstract PDF |
| Kumar, Ajay , Gulati, Vishal | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Optimization of cylindrical grinding process parameters using meta-heuristic algorithms | Abstract PDF |
| Rekha, Rajasekaran , Baskar, Neelakandan , Padman, Mallasamudram Ramanathan Anantha, Palanisamy, Angappan | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | Optimization of process variables in electric discharge machining (EDM) using Taguchi methodology | Abstract PDF |
| Kumar, Sudhir , Ghoshal, Sanjoy Kumar, Arora, Pawan Kumar | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Optimization of turning parameters of titanium chrome-molybdenum (Ti-Cr-Mo) alloy using taguchi method | Abstract PDF |
| Singh, Manpreet , Singh, Gagandeep , Jayant, Arvind | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Optimization of wear parameters for aluminium 4% fly-ash composites | Abstract PDF |
| Magibalan, Subramaniam , Senthilkumar, Palanisamy , Senthilkumar, Chinnamuthu , Prabu, Muthusamy | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | Optimization using genetic algorithm of tribological behaviour of WC tool material | Abstract PDF |
| Rana, Ramakant , Murtaza, Qasim , Walia, Ravinderjit Singh | ||
| Vol 27, No 5 (2020): IJEMS- OCTOBER 2020 | Performance analysis of 80 channels hybrid optical time division dense multiplexing system with the support of different orthogonal modulation techniques | Abstract PDF |
| Kumar, Ghanendra , kumar, sandep , Kumar, Sandeep | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Plastic/packaging waste separation from MSW and its conversion and used as value-added products in different applications- A eco-sustainable approach - A Review | Abstract PDF |
| Raj, Beenu | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Prediction of tribological characteristics of powder metallurgy Ti and W added low alloy steels using artificial neural network | Abstract PDF |
| Kandavel, Thanjavur Krishnamoorthy, Kumar, Thangaiyan Ashok, Varamban, Emaya | ||
| Vol 27, No 5 (2020): IJEMS- OCTOBER 2020 | Preparation of alternative raw materials for resource development to use in Indian ferro alloy and steel industrial applications | Abstract PDF |
| Srikant, Satya Sai, Rao, Raghupatruni Bhima | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Process optimization and comparative analysis of EDM and EDD process in machining Al6063/10% SiC metal matrix composites | Abstract PDF |
| Kachhapa, Sabindra , Singh, Abhishek , Debnath, Kishore | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Processing parameters in the ball milling of niobium hydride: An optimization approach | Abstract PDF |
| Silva, Gilbert , Souza, Dalton Garcia Borges de, Gabriel, Lucas Catalani, Rodrigues, Geovani , Silva, Carlos Eduardo Sanches da | ||
| Vol 27, No 6 (2020): IJEMS- DECEMBER 2020 | Production of graphene and carbon nanotubes using low cost carbon-based raw materials and their utilization in the production of polycarbonate/ethylene methyl acrylate -based nanocomposites | Abstract PDF |
| Sharma, Durlubh Kumar, Bagotia, Nisha | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | Productivity and welfare effects of agricultural technologies: A study of maize producing households in Ethiopia using PSM approach | Abstract PDF |
| Shita, Aynalem , Kumar, Nand , Singh, Seema | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Pulse electrodeposition of Ni/nano-SiC composite coatings: Effect of waveform, duty cycle and current density | Abstract PDF |
| Heidari, Gholamreza , Khoei, Mohammad Mosavie | ||
| Vol 27, No 1 (2020): IJEMS- February 2020 | Relationship between the late-age hydration and strength development of cement-slag mortars | Abstract PDF |
| Fanghui, Han , Xuan, Zhang , Juanhong, Liu | ||
| Vol 28, No 2 (2021): IJEMS- April-2021 | Retrospective investigation on emergence and development of additive manufacturing | Abstract PDF |
| Kumar, Harish , Khan, Shahroz Akhtar, Arora, Pawan Kumar | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | Simulation of the process variation in negative capacitance virtual-source carbon nanotube FET devices and circuits | Abstract PDF |
| Muthu, Bharathi Raj, Solomon, Ewins Pon Pushpa, Dhandapani, Vaithiyanathan | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Small delamination detection in carbon fibre reinforced polymer composite beam by NDT and vibration analysis | Abstract PDF |
| Nayak, Smaranika , Pattnaik, Swetansu , Panigrahi, Isham , Nayak, Rameshkumar , Parida, Sambitkumar | ||
| Vol 27, No 6 (2020): IJEMS- DECEMBER 2020 | Stable ensemble brightness from nitrogen vacancy centers in nanodiamonds through optimized surface composition | Abstract PDF |
| ., Sandeep , Kumar, Ravi , Subhedar, Kiran Mahadeo, Kumar, Raj , Dhakate, Sanjay Rangnath | ||
| Vol 28, No 1 (2021): IJEMS- February 2021 | Structural, mechanical, thermal, optical and antifungal properties of pure and nickel doped ninhydrin non liner single crystals | Abstract PDF |
| Ponchitra, Anand , Balasubramanian, Kumarasamy , Jothimani, Ramasamy , Sakthipandi, Kathiresan | ||
| Vol 28, No 2 (2021): IJEMS- April-2021 | Study of cutting ability of centrifugal cast HSS cutting tool in optimized process parameters | Abstract PDF |
| Mohapatra, Shubhashree , Sarangi, Hrushikesh , Mohanty, Upendra kumar | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Study of surface integrity and effect of process parameters in wire electrical discharge turning of Ti-6Al-4V | Abstract PDF |
| Nag, Akash , Srivastava, Ashish Kumar, Dixit, Amit Rai, Mandal, Amitava , Das, Alok Kumar | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Study on dry-sliding wear (DSW) of uncoated IN800 super alloy and sol-gel based dip coated IN800 substrate | Abstract PDF |
| Kumar, Dipak , Pandey, Kailash Narayan | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Study on microstructure and mechanical property of Ti-6Al-4V brazed joint with low temperature filler metal | Abstract PDF |
| Kumar, Santhebachahalli Venkataramu Anil, Gandhinathan, Rangappan | ||
| Vol 28, No 1 (2021): IJEMS- February 2021 | Surface plasmon based fiber optic refractive index sensor | Abstract PDF |
| Selvendran, Sakkarai , AAvaninathan, Sivanantha Raja, Kadarkarai, Esakki Muthu, SSrinivasan, Yogalakshmi | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Sustainable mortar mix using recycled fines obtained from construction and demolition waste | Abstract PDF |
| Soni, Nancy , Shukla, Dharmendra Kumar | ||
| Vol 27, No 6 (2020): IJEMS- DECEMBER 2020 | Synthesis and (some) applications of carbon-nanotube-supported pyrolytic carbon nanocones | Abstract PDF |
| Paredes, Germercy , Seinea, Grégory , Coursa, Robin , Houdelliera, Florent , Allouchea, Hatem , Ondarçuhuc, Thierry , Piazzab, Fabrice , Monthiouxa, Marc | ||
| Vol 27, No 6 (2020): IJEMS- DECEMBER 2020 | Synthesis and transfer of large area graphene without support layer | Abstract PDF |
| Ghai, Viney , Singh, Harpreet , Agnihotri, Prabhat Kumar | ||
| Vol 27, No 6 (2020): IJEMS- DECEMBER 2020 | Synthesis of carbon nanotube fiber via direct spinning for conducting wires | Abstract PDF |
| Dariyala, Pallvi , Arya, Abhishek Kumar, Singh, Bhanu Pratap, Dhakate, Sanjay Ranganth | ||
| Vol 27, No 6 (2020): IJEMS- DECEMBER 2020 | Synthesis of high surface area activated carbon from eucalyptus bark for the removal of methylene blue | Abstract PDF |
| Yadav, Shailesh Kumar, Subhedar, Kiran Mahadeo, Dhakate, Sanjay Ranganth, Singh, Bhanu Pratap | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Tensile fracture behavior of high carbon high manganese steel with single-phase austenite structure | Abstract PDF |
| Ding, Zhimin , Li, Jiaqi , Feng, Rui | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | The effect of CFRP strengthening on the behavior of deficient steel beams under concentrated and distributed loading | Abstract PDF |
| Keykha, Amir Hamzeh | ||
| Vol 27, No 4 (2020): IJEMS- AUGUST 2020 | The natural fibre and nano talc based hybrid composite of polypropylene: Thermal performance | Abstract PDF |
| Bajwa, Gurdevinder Singh, Singari, Ranganath Muttanna, Mishra, Radhey Shyam | ||
| Vol 27, No 1 (2020): IJEMS- February 2020 | Tribological Characterization of Ecodesigned Aluminium Hybrid Metal Matrix Composites | Abstract PDF |
| Moona, Girija , Walia, R. S. , Rastogi, Vikas , Sharma, Rina | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Tribological investigation of HVOF-spray Cr3C2-25NiCr and WC-10Co-4Cr coated turbine steel under varied slurry erosion conditions | Abstract PDF |
| Sharma, Mithlesh , Goyal, Deepak Kumar, Kaushal, Gagandeep | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Ultrafast microwave-assisted synthesis of various zinc oxide nanostructures | Abstract PDF |
| Ghai, Viney | ||
| Vol 27, No 5 (2020): IJEMS- OCTOBER 2020 | Ultra-violet responsive photocatalytic application of CuO/Bi oxide nitrate hydroxide hydrate powder | Abstract PDF |
| Radović Vučić, Miljana , Mitrović, Jelena , Kostić, Miloš , Velinov, Nena , Petrović, Milica , Bojić, Danijela , Bojić, Aleksandar | ||
| Vol 27, No 2 (2020): IJEMS- April 2020 | Unsteady flow of CNT-water nanofluid past a stretching sheet with slip effect | Abstract PDF |
| Chaudhary, Santosh | ||
| Vol 28, No 1 (2021): IJEMS- February 2021 | Use of electronic waste plastic in asphalt mix with marble dust as filler | Abstract PDF |
| Sinha, Rohan , Kumar, Saksham , Garg, Sarthak , Prasad, Narad Muni | ||
| Vol 27, No 1 (2020): IJEMS- February 2020 | Vacuum Oxy-nitro carburizing of tool steels: structure and mechanical reliability | Abstract PDF |
| Nikolova, Maria , Nikolov, Danail , Yankov, Emil , Derin, Bora , Topalski, Slavcho | ||
| Vol 27, No 3 (2020): IJEMS- JUNE 2020 | Wear properties and synthesis of CrFeNiMoTi high entropy alloy coatings produced by TIG process | Abstract PDF |
| Islak, Serkan , Eski, Özkan , Koç, Vahdettin , Özorak, Cihan | ||
| Vol 28, No 3 (2021): IJEMS-June 2021 | Mechanical behaviour and corrosion study of 304L austenitic steel processed by constrained groove pressing | Abstract PDF |
| Singh, Rahul , Singh, Samarjit , Kumar, Balina Kranthi, Kumar, Abhishek | ||
| Vol 28, No 3 (2021): IJEMS-June 2021 | Relationship between amplitude anisotropy and compressive strength of reinforced concrete depending on curing conditions | Abstract PDF |
| Ekin, Nevbahar | ||
| Vol 28, No 3 (2021): IJEMS-June 2021 | Water-containing i-propanol-n-butanol-ethanol (IBE) as a next-generation biofuel of n-butanol for diesel engine | Abstract PDF |
| Abubakar, Shitu , Hu, Junping , Li, Yuqiang , Narayyan, Sunny | ||
| 1 - 163 of 163 Items | ||
Indian Journal of Engineering and Materials Sciences (IJEMS)