Table of Contents
Articles
| Composite building materials from natural fibers/ agro-forest residues | |
| Singh, Richa ; Singh, Brajeshwar ; Gupta, Manorama ; Tarannum, Hina | 137-149 |
| Tribological investigation of HVOF-spray Cr3C2-25NiCr and WC-10Co-4Cr coated turbine steel under varied slurry erosion conditions | |
| Sharma, Mithlesh ; Goyal, Deepak Kumar; Kaushal, Gagandeep | 150-167 |
| On the axial bearing capability of construction steel tube considering the uniform corrosion effect | |
| Wang, Huajie ; Zhang, Zhiwei ; Qian, Hongliang ; Song, Gang ; Wang, Jiangbo ; Fan, Feng | 168-178 |
| Experimental determination of residual flexural strength and critical buckling load of impact-damaged glass/epoxy laminates | |
| Aslan, Züleyha ; Kiratli, Sakine | 209-220 |
| Mechanical properties and kinetics of boride layers on AISI D2 steel produced by plasma paste boriding | |
| Keddam, Mourad ; Makuch, Natalia ; Kulka, Michal ; Miklaszewski, Andrzej | 221-233 |
| Excellence of Al-metal matrix composite fabricated by gas injection bottom pouring vacuum stir casting process | |
| Kataria, Mukul ; Mangal, Sanjay Kumar | 234-245 |
| Optimization and investigation of process parameters in single point incremental forming | |
| Kumar, Ajay ; Gulati, Vishal | 246-255 |
| Microspheres based on black sand mineral as a photocatalyst for photocatalytic hydrogen production under UV light | |
| López Vásquez, Andrés Felipe ; Pataquiva-Mateus, Alis Yovana ; Delgado Niño, Pilar | 256-266 |
| Study of surface integrity and effect of process parameters in wire electrical discharge turning of Ti-6Al-4V | |
| Nag, Akash ; Srivastava, Ashish Kumar; Dixit, Amit Rai; Mandal, Amitava ; Das, Alok Kumar | 267-276 |
| Growth kinetics of Fe2B layers formed on the AISI 4150 steel by different approaches | |
| Zuno-Silva, Jorge ; Keddam, Mourad ; Ortiz-Domínguez, Martin ; Elias- Espinosa, Milton ; Arenas-Flores, Alberto ; Cervantes-Sodi, Felipe ; Reyes-Retana, José Angel | 277-287 |
| Anchoring the CFRP strengthening of concrete bridge decks: A comparison of methods | |
| Shuai, Tian ; Zhenkun, Miao ; Bo, Sun | 288-299 |
| Application of hybrid AHP-TOPSIS technique in analyzing the braking performance sensitivity of organic-ceramic fibrous reinforced friction composites | |
| Kumar, Mukesh | 300-308 |
| Machining performance enhancement of EN-31 diesteel using MWCNT mixed rotary EDM | |
| Bajaj, Rajesh ; Dixit, Amit Rai; Tiwari, Arun Kumar; Chauhan, Nitin Kumar | 309-319 |
| Optical, structural and thermal properties of hybrid PVA/CaAl2ZrO6 nanocomposite films |
|
| Maheshwarappa, Gayitri Hebbur; Al-Gunaid, Murad ; Siddaramaiah; Prakash, Akkanagowda Patel Gnana | 320-332 |
| Fabrication of prototype connecting rod of PLA plastic material using FDM prototype technology | |
| Maurya, Nagendra Kumar; Rastogi, Vikas ; Singh, Pushpendra | 333-343 |
| Tensile fracture behavior of high carbon high manganese steel with single-phase austenite structure | |
| Ding, Zhimin ; Li, Jiaqi ; Feng, Rui | 344-347 |
| Influence of micro-structural parameters on fatigue life of discontinuous reinforced metal matrix composites | |
| Tevatia, Abhishek ; Srivastava, Sunil Kumar | 348-355 |
| Influence of bearing raceway surface topography on the level of generated vibration as an example of operational heredity | |
| Zmarzły, Paweł | 356-364 |
| Ultrafast microwave-assisted synthesis of various zinc oxide nanostructures | |
| Ghai, Viney ; Sharma, Kshitiz ; Sanger, Jashan ; Singh, Harpreet ; Agnihotri, Prabhat Kumar | 365-372 |
| Effect of laser remelting on the microstructure and mechanical properties of meta inert gas welded low carbon mild steel | |
| Sathish, Sathyavageeswaran | 373-381 |
| Ductile fracture and microstructure of a bearing steel in hot tension | |
| Huo, Yuanming ; He, Tao ; Xue, Yong ; Shen, Menglan ; Yang, Wanbo ; Hu, Yujia | 382-388 |
| Optimization of cylindrical grinding process parameters using meta-heuristic algorithms | |
| Rekha, Rajasekaran ; Baskar, Neelakandan ; Padmanaban, Mallasamudram Ramanathan Anantha; Palanisamy, Angappan | 389-395 |
| Unsteady flow of CNT-water nanofluid past a stretching sheet with slip effect | |
| Chaudhary, Santosh | 396-403 |
| Microstructure, texture, and mechanical properties of two-pass extruded Mg-5Li-1Al sheet | |
| Li, Ruihong ; Jiang, Bin ; Chen, Zhijun ; Pan, Fusheng ; Zhang, Xiaomei | 404-409 |
| Effect of surface mechanical attrition on microstructure and mechanical properties of hypoeuctectoid steel | |
| Tadge, Prashant ; Sasikumar, Chandrabalan | 418-423 |
| Machinability analysis and characterization of aluminium hybrid metal matrix composite using WEDM | |
| Subbaian, Venkatesan ; Jacob, Kingston Barnabas; Durairaj, Ravindran | 424-430 |
| A Unique Pipe-Like C3N4 with Enhanced Photocatalytic Degradation of Organic Pollutant | |
| Akple, Maxwell Selase | 431-437 |
| The effect of CFRP strengthening on the behavior of deficient steel beams under concentrated and distributed loading | |
| Keykha, Amir Hamzeh | 438-444 |
| DRIFT ANALYSIS OF A Pd LOADED SnO2 BASED LINALOOL SENSOR | PDF PDF |
| Kakoty, Priyanka ; Bhuyan, Manabendra ; Das, Karen | 445-451 |
| Effect of Nano-Silica on the Physical, Mechanical and Thermal Properties of the Natural Rubber Latex Modified Concrete | |
| Varghese, Marina Leyan; Babu, Richu John; R, Suraj Menon; Rajan, Reny ; Gopal, Vinayak Venu; Jacob, Ancheli Siby; Titus, Vinny Ann; Mathew, Mini ; George, Soney Chathukulam | 452-457 |
| Optimization of wear parameters for aluminium 4% fly-ash composites | |
| Magibalan, Subramaniam ; Senthilkumar, Palanisamy ; Senthilkumar, Chinnamuthu ; Prabu, Muthusamy | 458-464 |
| Design and Analysis of Decagonal Photonic Crystal Fiber with Elliptical air hole core for liquid sensing | |
| Panwar, Kuntal ; Sharma, Ritu ; Sharma, Varshali ; Saxena, Namrata ; Chaudhary, Santosh | 465-470 |
| Effect of material and machining features in electric discharge machining of 6061Al/rock dust composites | |
| Prakash, Kumarasamy Soorya; Gopal, Pudhupalayam Muthukutti; Rahul, Raghavan Nair | 471-480 |
| Multifactor optimization for development of hybrid aluminium matrix composites | |
| Singh, Swarndeep ; Singh, Rupinder ; Gill, Simranpreet Singh | 481-489 |
| Microstructural characterization and mechanical properties of mini specimen of research reactor fuel cladding | |
| Sungkono; Ajiriyanto, Maman Kartaman; Ismarwanti, Sri | 490-495 |
Review Articles
| Additive manufacturing of composite materials by FDM technology: A review | |
| Mazurchevici, Andrei Danut; Nedelcu, Dumitru ; Popa, Ramona | 179-192 |
| Plastic/packaging waste separation from MSW and its conversion and used as value-added products in different applications- A eco-sustainable approach - A Review | |
| Raj, Beenu ; Kumar, Jagdish ; Rao, Velidandi Venkata Lakshmi Kanta | 193-208 |
| Characteristic investigations of cutting-force measuring dynamometers | |
| Khan, Shahroz Akhtar; Azam, Mohammad Sikandar; Chattopadhyay, Somnath ; Kumar, Harish | 410-417 |
Indian Journal of Engineering and Materials Sciences (IJEMS)